Working With Leather the ultimate source forthe BDSM leatherworker
Shopping Cart


Shopping Cart

Home


Buckles
& Lockables
locking tongue buckles
heel tongue buckle
center bar tongue buckle
double tongue buckle
conway buckle
locking posts
plate staples
padlocks with key

Rings, Loops
& Tie-downs
D-shaped
loops
rings
tie-downs

Rivets & Fasteners
two-part hit together
chicago screw posts
snap together fasteners

Snapshooks
snaphooks
panic snaps
double end snaphooks

Chain / Leather Straps
& Webbing
 link chain
leather strapping
strap webbing
webbing supplies

Spikes & Studs
 screw in spikes
studs

Tools & Leather Care
leather tools
rivet tools
Leather Care Products

Gags & Nipple Clamps & Riding Crop
ball gags
ball gag post
pony bits
nipple clamps
riding crop

Eyelets & Grommets
boot hooks
speed laces
grommets
eyelets
Spike Setter | Mini-Anvil | Strap Cutter | Oblong Punches | Lace Maker | Mini Punch Sets
Mallet | Bevelers | Adjustable Creaser | Bone Folder | Rotary Cutter | Pondo Board
Rivet Setter | Grommet Setter | Snap Setter | Eyelet Setter | Slot Punch | Tool Kits

Leather Working Tools

We keep it simple and carry the basics: the tools and sizes that we've found most useful for BDSM leather working. This selection will help the newbie get started... no intimidating selection, no pushy salesperson.
Spike setter. This setter is purpose made for my WD-001 spikes Spike setter
This setter is purpose made for our WD-001 spikes.
Qty Pricing
 Item No   1+    
WT-001: Spike Setter  $4.99   $ 
Quantity:

mini-anvil for leatherworking Mini-anvil
If you don't have a very solid metal surface or want to work anywhere, this two-pound cast iron anvil is an excellent setting surface.
Qty Pricing
 Item No   1+    
WT-002: 2lb Anvil  $15.29   $ 
Quantity:

Leather strap cutter Strap cutter
An exceptional tool for cutting strap to a given width. A must have if you buy leather by the side. Pick up some spare blades, too, in packs of 5. Sharp blades make a huge difference.
Qty Pricing
 Item No   1+    
WT-003: Strap Cutter  $24.99   $ 
WT-004: 5pk Blades  $3.79   $ 
Quantity:

Oblong hole leather punch Oblong punches
These forged punches cut the right sized slots for plate staples (1" and 3/4" for large, 5/8" for small) and locking roller buckles (1/2" for normal fit, 3/8" for tight fit and closer slot spacing), and are must-have tools if you plan to use these closures. Never strike forged punches with a steel hammer or you'll break them, get one of our Polly Mallets.
Qty Pricing
 Item No   1+    
WT-024: 3/8in  $47.99   $ 
WT-006: 1/2in  $28.99   $ 
*WT-025: 5/8in  $27.99   $ 
WT-005: 3/4in  $32.99   $ 
WT-026: 1in  $30.99   $ 
 * Out Of Stock
Quantity:

Oblong hole leather punch Lace maker
This is the best lace cutter we've found. It is fast and easy to use, and only takes a little practice to get good. If you plan to cut your own lace for braiding or anything else, this is the cutter to use. Spare blades available in 10 packs, and a sharp blade makes a huge difference in the ease of use for this tool.
Qty Pricing
 Item No   1+    
WT-007: Lace Maker  $9.29   $ 
WT-008: 10pk Blades  $3.29   $ 
Quantity:

mini leather punch set Mini punch set
You'll make a lot of holes doing leatherwork, and the workhorse of the home crafter's tools are this set and the next one. The mini punch set includes a steel handle, interchangeable punch tubes in six sizes, and a tube wrench. This is a must have tool.
Punch sizes: 5/64 ", 3/32", 1/8", 9/64", 5/32", 11/64".
Qty Pricing
 Item No   1+    
WT-009: Mini Punch Set  $8.79   $ 
Quantity:

maxi leather punch set Maxi punch set
 This set contains six larger punch tubes and the larger handle that fits them. The "wrench" for these tubes is a little hex wrench. This is a must have tool.
Punch sizes: 3/16", 13/64", 7/32", 1/4", 17/64", 5/16 ".
Qty Pricing
 Item No   1+    
WT-010: Maxi Punch Set  $11.99   $ 
Quantity:

Poly mallet Poly mallet
This mallet has a durable, quiet head weighing 14 ounces. Having tried a wide range of mallets, we've selected this one as the best overall choice.
Qty Pricing
 Item No   1+    
WT-011: Poly Mallet  $22.95   $ 
Quantity:

keen beveler #3 Keen beveler, #3
This is our favorite beveler for most edges. Its quarter-round profile bevels edges that burnish more evenly, resulting in a nice finished product. #3 is far and away the best size for heavier leather.
Qty Pricing
 Item No   1+    
WT-012: Size #3  $9.99   $ 
Quantity:

edge beveler #3 Edge beveler, #2
This is a chamfer-style beveler, meaning it cuts a straight slant while beveling. This doesn't burnish down as nicely as the Keen's rounded profile. However, this beveler doesn't have a long leading tip and can therefore bevel insider tight corners (like the inside edge of a buckle slot).
Qty Pricing
 Item No   1+    
WT-013: Size #2  $10.59   $ 
Quantity:

adjustable leather creaser Adjustable creaser
We think an aesthetic crease line adds a touch of distinction to bondage gear. This adjustable creaser does the trick wonderfully, and is easier to operate than other styles.
Qty Pricing
 Item No   1+    
WT-014: Creaser  $9.49   $ 
Quantity:

leather bone folder Bone folder
Here's a handy tool that's so cheap it's a must-have. It's made of nylon. The stick portion is an excellent burnishing tool for flat surfaces, and the top portion has several shaped slots to do edges
Qty Pricing
 Item No   1+    
WT-015: Bone Folder  $3.79   $ 
Quantity:

Rotary cutter Rotary cutter
We're usually the last folks to give up a traditional method for something new-fangled, and the rotary cutter is no exception. We refused to try one for the longest time! We do begrudgingly admit, however, that a rotary cutter is far, far superior to a razor knife. Keep it sharp, replace the blade when badly nicked, and you'll absolutely love this tool.
Qty Pricing
 Item No   1+    
WT-016: Rotary cutter  $22.95   $ 
WT-017: Blade Only  $7.99   $ 
Quantity:

Pounding board Poundo board
This piece of 1/4" rubber is a GREAT striking surface. Not only does it protect the tool, it's relatively quiet too. Also excellent as a "second" backer for punching holes... toss a piece of scrap leather on top and you've got excellent protection for your cutting edges. Measures 12" by 12".
Qty Pricing
 Item No   1+    
WT-018: Poundo Board  $17.99   $ 
Quantity:

rivet setter Rivet setter
Another very standard tool. This setter has a slight concave area on one end, intended to match the cap of our medium rivet. This will fit up to 9.5mm head size rivets.
Qty Pricing
 Item No   1+    
WT-020: Small rivet setter  $2.99   $ 
Quantity:

Grommet setter #1 Grommet setter and anvil
Matched set for setting the #1 grommets available from WWL Hardware, used to reinforce lock post holes cleanly
Qty Pricing
 Item No   1+    
WT-027: Grommet Tool  $19.99   $ 
Quantity:

Snap Setter & Anvil Snap setters
For Ligne 20 and 24 snaps with anvil for large and small snaps. Matched set for setting the snaps available from WWL Hardware (and any other snaps, of course)
Qty Pricing
 Item No   1+    
WT-021: Small Ligne20  $8.59   $ 
WT-028: Large Ligne24  $8.99   $ 
Quantity:

Eyelet setter Eyelet setters
Select either setter for 5/32" or 7/32" eyelets.
Qty Pricing
 Item No   1+    
WT-019: 5/32in  $1.99   $ 
WT-022: 7/32in  $2.89   $ 
Quantity:

Slot punch Slot Punch
Adjustable punch used to make regularly spaced slots for the prongs on spots and studs. Variable spacing using set screw on side of tool.
Qty Pricing
 Item No   1+    
WT-023: Adjustable Slot Punch  $24.99   $ 
Quantity:

Tool Kits

Basic Tool Kit - If you don't have much to spend, this set of tools will get you going. You'll want to visit the hardware store for a small square and standard razor knife. Includes:
WT-009: Mini Punch Set
WT-010: Maxi Punch Set
WT-011: Polymer Mallet
WT-020: Rivet Setter
WU-005: Wool Daubers (10/pk)

Expanded Tool Kit - This more comprehensive kit features the tools we consider essential for serious leather working. You'll still want that square and razor knife from the hardware store. Includes:
WT-009: Mini Punch Set
WT-010: Maxi Punch Set
WT-011: Polymer Mallet
WT-020: Rivet Setter
WU-005: Wool Daubers (10/pk)
WT-002: Mini Anvil, 2 pound
WT-003: Strap Cutter
WT-004: Extra Blades for WT-003 (5/pk)
WT-012: Keen Edge Beveler #3
WT-013: Common Edge Beveler #2
WT-015: Bone Folder
WT-016: Rotary Cutter
WT-018: Poundo Board, 12" by 12"
Qty Pricing
 Item No   1+    
WK-001: Basic  $39.99   $ 
*WK-002: Expanded  $124.95   $ 
 * Out Of Stock
Quantity:

Back to Top
Contact Us | Shipping Information | Wholesale Inquires

©2001-2004 SarOfTreve; ©2010 wwlhardware.com
The purchase of items from WWL Hardware constitutes an agreement that the buyer is solely responsible for the safe use thereof.
WWL Hardware and all affiliates make no claims of fitness for a particular purpose.

Please help spread the word.. link to this page