Locking Posts, Plate Staples & Tie Down Rings

This hardware is used in all kings of BDSM designs to fasten, secure and lock pieces together.

Locking Posts
A lock post is a small piece of hardware with a wide base and upright post. There's a hole drilled through the post near the top. By trapping two pieces of leather (or other material) on the post between base and a lock through this top hole, you create a secure closure. Standard lock posts have one or more holes in the base, and are attached to the lower piece of material. All of these lock posts go through 1/4" holes, and take a padlock hasp up to 5/32" in diameter.

Standard Lock Post
Chrome-plated zinc die cast. This small post attaches to the base strap with a single rivet.

Qty Pricing
Item No	1-11	12+
WC-007: Chrome	$1.29	$1.19

Plate Lock Post
Chrome-plated zinc die cast. Lock post with plate mounting, attaches to the base strap with four rivets for more strength and stability.

Qty Pricing
Item No	1-11	12+
WC-004: Chrome	$1.69	$1.59

Slim Lock Post with Screw
This discrete post is 1/2" high and 1/4" in diameter, with a flared base for stability. Simple to install and excellent for lighter-weight locking gear.

Qty Pricing
Item No	1-11	12+
WC-010: Nickel	$1.39	$1.29

Floating Lock Post
Chrome-plated zinc die cast. For use in floating lock post closures, this piece has a longer post and no holes in the base. FLP closures are our original designs and use two sets of holes with differential spacing to provide better adjustability than any similar closure.

Qty Pricing
Item No	1-11	12+
WC-001: Chrome	$1.39	$1.19

Double Floating Lock Post
Chrome-plated zinc die cast. For use in floating lock post closures, this piece has a longer post and no holes in the base. This lock post is our original design, and uses two sets of holes with differential spacing to provide better adjustability than any similar closure.

Qty Pricing
Item No	1-11	12+
WC-002: Chrome	$1.49	$1.39

Plate Staples & Tie Downs
One of the most popular pieces of hardware for do-it-yourself BDSM crafters. A plate staple consists of a flat base and protruding hoop. This hardware can be used as a rope and leather strap guide or as a closure. As a closure, it's usually secured to one side of the closure and inserted through a slot in the opposite side. A lock, snap or clip can then go through the hoop to secure the two sides together. We've spec'ed these plate staples specifically for bondage use. The hoops on these staples will take bigger locks, but the narrower slots required result in stronger, more durable cuffs. Check out our small locks for the plate staples and locking posts.

Small Plate Staple
Chrome-plated zinc die cast. Shiny chrome finish. This plate staple has a 1-1/8" x 1" plate with 5/8" wide hoop and uses 5/8" slots.

Qty Pricing
Item No	1-11	12+
WC-003: Chrome	$3.29	$2.99

Large Plate Staple
Chrome-plated zinc die cast. Shiny chrome finish. This plate staple has a 1-3/4" x 1" plate with 3/4" wide hoop and uses 3/4" slots.

Qty Pricing
Item No	1-11	12+
WC-008: Chrome	$3.49	$3.29

Extra Large Plate Staple
Chrome-plated zinc die cast. Shiny chrome finish.
This loop is 1-3/8" wide with an overall 1" high hoop. Screws and washers are also included.

Qty Pricing
Item No	1-11	12+
WC-011: Chrome	$1.99	$1.69

Tie Down Ring
This sturdy plate and ring makes an excellent attachment point on furniture, walls, and so on.
Plate measures 1-7/8" square, ring is 2".
Zinc plated steel.

Qty Pricing
Item No	1-11	12+
WC-009: Zinc	$1.99	$1.79

©2001-2004 SarOfTreve; ©2010-2011 wwlhardware.com
The purchase of items from WWL Hardware constitutes an agreement that the buyer is solely responsible for the safe use thereof.
WWL Hardware and all affiliates make no claims of fitness for a particular purpose.